Description

Chevrolet Corvette C2 Saddle Consoles, 1963-1966

Three handcrafted consoles are available for your 1963 to 1966 Chevrolet Corvette C2. All three versions will fit over the factory-installed console OR over the transmission hump, between the bucket seats. They offer superior craftsmanship and quality features that will bring a whole new dimension to your cruising life style. For example, standard features include, a padded armrest for premium comfort while driving. Also the ergonomic design provides maximum arm support on those longer drives. Additionally, one or two large drink holders are included (depending on which console version is ordered) with an optional upgrade to our new Mega size drink holder. Finally, there is a much needed under-lid storage compartment.

You will appreciate this professionally upholstered console coupled with high-quality automotive-grade vinyl. Equally important is our large selection of standard color choices that complement original and aftermarket interiors.

The Bullet and the Bullet DD versions stop just behind the gear selector and the Shorty version stops behind the seat belt buckle latches, leaving them accessible for use.

– The Corvette Bullet DD (DD = Dual Drink Holder) provides two Large drink holders and ample storage space located under the armrest.

– The Corvette Bullet offers the most armrest space out of the the three versions. Moreover, it has ample storage space located under the armrest and one Large drink holder.

– The Corvette Shorty is built for the minimalist. The console stops short of the seat belt buckle latches. The shorty has a smaller storage compartment and one Large drink holder.

Note: If you are looking for a Corvette C1 1953-1962, click here to view console options.

Hand Built in the United States

Chevrolet Corvette C2 Saddle Console, 1963 – 1966

Specs

Corvette Bullet DD (Dual Drink Holder)

Part Number:

- GMCORV6366DD (double drink holder)

What’s Included

- Two Large Drink Holders (upgradable to Mega size)
- Padded Armrest
- Enclosed Storage Compartment

Dimensions:

- 5-3/4” Width overall
- 16-1/2” Length overall
- 12” Height overall
- 5-1/2” Height at the armrest
- 4-3/4″ Width of storage
- 14″ Length of storage
- 1-3/4″ Height of storage

Corvette Bullet (Single Drink Holder)

Part Number:

- GMCORV6366Bullet (single drink holder)

What’s Included

- One Large Drink Holders (upgradable to Mega size)
- Padded Armrest
- Enclosed Storage Compartment

Dimensions:

- 5 3/4” Width overall
- 16-1/2” Length overall
- 12” Height overall
- 5-1/2” Height at the armrest
- 4-3/4″ Width of storage
- 14″ Length of storage
- 1-3/4″ Height of storage

Corvette Shorty

Part Number:

- GMCORV6366Shorty (short, single drink holder)

What’s Included

- One Large Drink Holders (upgradable to Mega size)
- Small Padded Armrest
- Enclosed Storage Compartment
- Does Not Cover Seat Belt Buckle Holders

Dimensions (both versions):

- 6” Width overall
- 13-1/4” Length overall
- 11” Height overall
- 5-1/2” Height at the armrest
- 4-1/2″ Width of storage at cup holder
- 4-1/4″ Rear width of storage
- 11″ Length of storage
- 2″ Height of storage

Vehicle Guide

Chevrolet Corvette Saddle Consoles

There are three similar but different consoles for 1963 to 1966 Corvettes.

Part Numbers: GMCORV6366Bullet, GMCORV6366DD & GMCORV6366Shorty

- Chevrolet Corvette (C2), 1963-1966

Installation

Chevrolet Saddle Console

Very simple installation and removal, no permanent changes to the car’s interior and no tools required. Saddle consoles fit securely over the factory-installed (OE) console, between factory bucket seats. This console will not interfere with the factory gear selector or the hang down AC unit.

The Shorty version will sit behind the seat belt buckle holders.

Vinyl Color Options

With our large selection of in-stock automotive grade vinyl, you are sure to find the right color and grain to match your vehicle. We can even use your own material to cover any console design, no extra cost to you. In most cases, we’ll only need one yard of material to fully cover most console designs. Optional two-tone colors are available for most console designs whether you are choosing from our vinyl selection or providing your own material.

In addition to the standard color options, we offer a host of premium vinyl colors which are available for an additional cost of $16.00 per console. These colors are limited and unique to certain vehicle models and years. The additional cost is due to their random availability and the premium cost to obtain from suppliers. If these vinyl options are listed on the product page colors then they are currently available for your console.

Vinyl Samples are available to make it easier to pick the right color or grain. We’ll ship the sample at no cost, directly to you.

Email us at [email protected] to request sample vinyl swatches, ordering two-tone color options or using your own upholstery material.

Drink Holder Options

The drink holders in our consoles are made from durable, long-lasting polymers that will provide many, many years of functionality while retaining the striking appearance you expect from Classic Consoles. All drink holders come standard with a black finish around the top rim. The top rim is the area of the drink holder predominately seen when the console is installed in your vehicle so we offer you the option of four additional distinct colors & finishes to customize your console or match the existing trim package of your vehicle’s interior.

Our large-sized drink holders are included with this console, they accommodate virtually all types of soda & energy drink cans, most plastic water bottles and larger coffee cups. The bottom half of our large drink holders have a unique step down shape to allow smaller drink containers a secure hold while the upper half is large enough to hold bigger beverages with larger diameters.

You also have an option to upgrade the Large Drink Holders in this console to our brand new Mega Drink Holder. The Mega Drink holder is specifically designed to hold large, insulated beverage containers by maintaining a wide diameter from top to bottom and does not “step down” like the Large Drink Holder. We built the Mega Drink Holder as a special request from many of our great customers who wanted a better fitting drink holder for their large insulated mugs, like many of the Yeti styles.