The King Konsole is a universal fitting truck console designed for full-size trucks. Generally speaking it works in trucks with a bench seat and where the shifter is on the steering column. It has a vast, covered storage area. It also comes standard with two large drink holders or upgrade to our new Mega size drink holder.
Simple and clean installation. Best of all, no tools or modifications to your truck. Which also means no permanent changes to your interior. Your car remains in its original condition. In no time, you’ll be ready to cruise and enjoy a favorite beverage without the worry of spilling all over your interior.
We’ve developed a unique non-slip, adjustable mounting system that conforms to the contour of the transmission tunnel. This mounting system works great in many full-size pickup trucks from the 1960s,’70s, ‘80s, 90s. The side panels have hidden speaker cutouts for mounting your own speakers or order speakers pre-installed from us.
If your truck has a floor shifter then check out our BC Cruiser or BD Drinkster consoles. Both offer multiple options for a full feature console that will fit perfectly on your bench seat.
The new King-Konsole is available with optional 6.5” round 2-way full Range Speakers complete with wiring to connect to your current stereo system, offering 250 W peak power.
Hand Built in the USA
King Konsole with Speakers
Two Large Drink Holders (upgradable to Mega drink holders)
Speaker Holes are Built-in to the Side Walls of this Console Version (holes are covered by upholstery until ready to use)
11 1/4″ Wide at the main body
3″ Additional width on both sides for adjustable plates
16 3/4″ Length overall
9 3/4″ Height, main body (without taking into account the adjustable plates)
9″ x 8 1/2″ x 8 3/4″ (L x W x H) storage compartment (approx. 576 cubic inches)
King Konsole Universal Truck Floor Console
The King Konsole was originally designed for full-sized trucks, however, these consoles are considered universal and will fit most applications with an unobstructed floor area in front of the seats. The King Konsole is highly adaptable and will fit a flat floor vehicle or one with a transmission tunnel. Pre-installed on the bottom of each console is an adjustable mounting system that can easily be shaped by hand to accommodate any floor design.
This console will not work in trucks with a 4×4 or gear shifter coming out of the transmission tunnel in front of the seats.
King Konsole Installation
Installation is fast and easy, no permanent alterations or tools needed.
The King Konsole was originally designed for full-sized trucks, however, these consoles are considered universal and will fit most applications with an unobstructed floor area in front of the seats. The King Konsole is highly adaptable and will fit a flat floor vehicle or one with a transmission tunnel. The King Konsole comes pre-installed with a non-slip, adjustable mounting system on the bottom of the console that can easily be shaped by hand to match the contour of the floor.
– For flat floor installations, simply unscrew the Adjustable Mounting System on the bottom of the console OR the adjustable panels can easily be flattened by hand, depending upon your preference. Then place the console on the floor.
– For contoured floors or floors with a transmission tunnel simply bend and shape the adjustable panels by hand to customize the fit around the tunnel. Adjust the panels as needed to achieve a custom fit.
The Non-Speaker version has hidden speaker cutouts in the side panels for mounting your own speakers. You will be able to feel the speaker cutouts behind the vinyl. To install your own speakers, cut a small X in the center of the speaker cutout. Work your way closer to the edge as you make the cuts. Do not go all the way to the edge of the cutout. Add four more cuts to the large flaps between the X. This should provide enough flexibility and room to mount your round speaker.
Vinyl Color Options
With our large selection of in-stock automotive grade vinyl, you are sure to find the right color and grain to match your vehicle. We can even use your own material to cover any console design, no extra cost to you. In most cases, we’ll only need one yard of material to fully cover most console designs. Optional two-tone colors are available for most console designs whether you are choosing from our vinyl selection or providing your own material.
In addition to the standard color options, we offer a host of premium vinyl colors which are available for an additional cost of $16.00 per console. These colors are limited and unique to certain vehicle models and years. The additional cost is due to their random availability and the premium cost to obtain from suppliers. If these vinyl options are listed on the product page colors then they are currently available for your console.
Vinyl Samples are available to make it easier to pick the right color or grain. We’ll ship the sample at no cost, directly to you.
Email us at [email protected] to request sample vinyl swatches, ordering two-tone color options or using your own upholstery material.
Drink Holder Options
The drink holders in our consoles are made from durable, long-lasting polymers that will provide many, many years of functionality while retaining the striking appearance you expect from Classic Consoles. All drink holders come standard with a black finish around the top rim. The top rim is the area of the drink holder predominately seen when the console is installed in your vehicle so we offer you the option of four additional distinct colors & finishes to customize your console or match the existing trim package of your vehicle’s interior.
Our large-sized drink holders are included with this console, they accommodate virtually all types of soda & energy drink cans, most plastic water bottles and larger coffee cups. The bottom half of our large drink holders have a unique step down shape to allow smaller drink containers a secure hold while the upper half is large enough to hold bigger beverages with larger diameters.
You also have an option to upgrade the Large Drink Holders in this console to our brand new Mega Drink Holder. The Mega Drink holder is specifically designed to hold large, insulated beverage containers by maintaining a wide diameter from top to bottom and does not “step down” like the Large Drink Holder. We built the Mega Drink Holder as a special request from many of our great customers who wanted a better fitting drink holder for their large insulated mugs, like many of the Yeti styles.
Large Drink Holder Dimensions
3 5/8 inch upper interior diameter (3.691″ to be exact)
2 13/16 inch lower interior diameter
3 1/4″ inch interior depth
Mega Drink Holder Dimensions
3 5/8 inch interior diameter, from top to bottom (3.667″ to be exact)