The Low Rider floor console is low profile and feature rich. Two available sizes, both fit a wide range of vehicles however, they are best suited for full-width cars and trucks. As the name states, these consoles rest on the floor in front of any bench seat and do not have floor-mounted gear shifters. Both sizes offer the same look and design but differ in length (size info in the Specs tab).
Both versions have a covered storage area and external cell phone sleeve. They also come standard with two large drink holders or you can upgrade to our new Mega size drink holder. We’ve developed a unique non-slip, adjustable mounting system that easily conforms to the floor or transmission tunnel.
Simple, clean installation and best of all, no tools or modifications to your car. Which also means no permanent changes to your interior. Your car remains in its original condition. In no time, you’ll be ready to cruise and enjoy a favorite beverage without the worry of spilling all over your interior.
– The Low Rider accommodates the largest full-sized vehicles out there, it consumes most of the depth (front-to-back) between the bench seat and firewall/dash. Typically used in the front seat where the shorty version works well in the back seat area.
– The Low Rider Shory is, well…it’s shorter in length and works best in cars with less depth (measured front to back) between the front of the bench seat and firewall/dash. Also used in the back seat area where floor space is limited and less room for full-sized consoles.
Note: Both versions only work in vehicles without a floor-mounted gear shifter, either manual or automatic.
Hand Built in the USA
Low Rider Floor Console
Specs
Low Rider
Part Number:
LOWRIDER
What’s Included:
Two Large Drink Holders (upgradable to Mega drink holders)
6″ Height at drink holders, not including Adjustable Mounting System (height can vary from car-to-car)
5″ Height at the main body
117 square inches internal storage compartment space, 6″ x 6.5″ x 3″ (L x W x D)
Vehicle Guide
Low Rider Universal Floor Consoles
The Low Rider was originally designed for full-sized vehicles, however, these consoles are considered universal and will fit most applications with an unobstructed floor area in front of the seats. Both Low Rider versions are highly adaptable and will fit a flat floor vehicle or one with a transmission tunnel. Pre-installed on the bottom of each console is an adjustable mounting system that can easily be shaped by hand to accommodate any floor design.
Use the individual console dimensions in the “Specs” tab to determine which Low Rider console will work best for your application.
Installation
Low Rider Installation
Installation is fast and easy, no permanent alterations or tools needed.
The Low Rider consoles are universal and will fit most applications with an unobstructed floor area in front of bench seats. They are highly adaptable and will fit a flat floor vehicle or one with a transmission tunnel. The pre-installed, non-slip, Adjustable Mounting System on the bottom of the console can easily be shaped by hand to match the contour of the floor.
– For flat floor installations, simply unscrew the Adjustable Mounting System on the bottom of the console OR the adjustable panels can easily be flattened by hand, depending upon your preference. Then place the console on the floor.
– – For contoured floors or floors with a transmission tunnel simply bend and shape the adjustable panels by hand to customize the fit around the tunnel. Adjust the panels as needed to achieve a custom fit.
Vinyl Color Options
Color Options from Classic Consoles
With our large selection of in-stock automotive grade vinyl, you are sure to find the right color and grain to match your vehicle. We can even use your own material to cover any console design, no extra cost to you. In most cases, we’ll only need one yard of material to fully cover most console designs. Optional two-tone colors are available for most console designs whether you are choosing from our vinyl selection or providing your own material.
In addition to the standard color options, we offer a host of premium vinyl colors which are available for an additional cost of $16.00 per console. These colors are limited and unique to certain vehicle models and years. The additional cost is due to their random availability and the premium cost to obtain from suppliers. If these vinyl options are listed on the product page colors then they are currently available for your console.
Vinyl Samples are available to make it easier to pick the right color or grain. We’ll ship the sample at no cost, directly to you.
Email us at [email protected] to request sample vinyl swatches, ordering two-tone color options or using your own upholstery material.
201 Fiesta Red
202 Red
203 Dark Red
204 Maroon
205 Bright Red
208 MAD 4470 Blue
209 Corinthian Blue
210 Sierra Lt. Blue
211 Madrid Lt. Blue
212 Bright Blue
213 Metallic Dk. Blue
214 Dark Madrid Blue
215 66M Turquoise
216 Aqua
217 HDI 6858 Teal
218 HDI 6857 Peacock
220 Dark Brown
221 Coconut Brown
222 Parchment
223 Oak
224 Joe Camel
225 Claret
227 Buckskin
228 Saddle
230 Lone Star Silver
231 Light Graphite
232 Titanium
233 Graphite
234 SVO Gray
235 Wallaby White
236 White
237 57T White
238 Ivory
239 Jamaican Sun
240 Orange
241 Ivy Gold
242 Hunter Green
243 69 Madrid Green
244 Sierra Black
245 Madrid Black
246 Midnight Black
247 Carbon Fiber Black
248 Carbon Fiber Silver
256 Nugget Gold
252 57T Blue
301 Palomino
302 Emberglow
303 Ginger
304 Light Parchment
Drink Holder Options
The drink holders in our consoles are made from durable, long-lasting polymers that will provide many, many years of functionality while retaining the striking appearance you expect from Classic Consoles. All drink holders come standard with a black finish around the top rim. The top rim is the area of the drink holder predominately seen when the console is installed in your vehicle so we offer you the option of four additional distinct colors & finishes to customize your console or match the existing trim package of your vehicle’s interior.
Our large-sized drink holders are included with this console, they accommodate virtually all types of soda & energy drink cans, most plastic water bottles and larger coffee cups. The bottom half of our large drink holders have a unique step down shape to allow smaller drink containers a secure hold while the upper half is large enough to hold bigger beverages with larger diameters.
You also have an option to upgrade the Large Drink Holders in this console to our brand new Mega Drink Holder. The Mega Drink holder is specifically designed to hold large, insulated beverage containers by maintaining a wide diameter from top to bottom and does not “step down” like the Large Drink Holder. We built the Mega Drink Holder as a special request from many of our great customers who wanted a better fitting drink holder for their large insulated mugs, like many of the Yeti styles.
Large and Mega Drink Holders Side-By-Side
Insulated Mug in Large Drink Holder
Insulated Mug in Mega Drink Holder
Large Drink Holder Dimensions
3 5/8 inch upper interior diameter (3.691″ to be exact)
2 13/16 inch lower interior diameter
3 1/4″ inch interior depth
Mega Drink Holder Dimensions
3 5/8 inch interior diameter, from top to bottom (3.667″ to be exact)
3 3/8 inch interior depth
Rim Color Options:
Black
Chrome
Pewter
Matte Silver
Camouflage
Rim Color Options, Right to Left, Top Row – Chrome, Matte Silver Bottom Row: Pewter, Camo & Black
The drink holders in our consoles are made from durable, long-lasting polymers that will provide many, many years of functionality while retaining the striking appearance you expect from Classic Consoles. All drink holders come standard with a black finish around the top rim. The top rim is the area of the drink holder predominately seen when the console is installed in your vehicle so we offer you the option of four additional distinct colors & finishes to customize your console or match the existing trim package of your vehicle’s interior.
