The Camaro Saddle console fits over a factory-installed console, between the bucket seats and just behind the gear selector.
This console comes standard with quality features that will bring a whole new enjoyment to your cruising life. For example a padded armrest ergonomically positioned to support the driver’s arm for maximum comfort, an under-lid storage compartment, one medium and one large drink holder. You can also upgrade the large drink holder to our new Mega drink holder which accommodates the largest variety of beverage container sizes.
Best of all, no tools are necessary for installation. Which also means no modifications or permanent changes to your interior. Your car remains in its original condition. In no time, you’ll be ready to cruise and enjoy a favorite beverage without the worry of spilling all over your interior.
Going to a car show? In a matter of seconds, you can remove the console for that original factory look. Just don’t forget to put the console back in the car before leaving the show!
One important note, this console will NOT fit in your car unless you have a factory (OE) console installed. In this case you will want to use our HumpHugger console which has all the same features but uses the transmission tunnel to sit on. Click Here to see the HumpHugger version.
Hand Built in the United States
Chevrolet Camaro Saddle Console, 1968-1969
Camaro Saddle Console
One Large Drink Holder (upgradable to Mega size)
One Medium Drink Holder
Padded Armrest – Also a Hinged Lid for Storage Compartment
Storage Compartment, Under Armrest
Map/Document Sleeve, Underside of Lid
8-1/2” Wide at the drink holders
8” Wide at storage box & shifter boot or coin tray
6-3/8″ Wide in storage area
18-1/2” Length overall
11-3/8″ Length of storage area
6-1/2” Height at drink holders (w/ adjustable plates flat)
3-1/2″ Height in storage area
9-1/2” Height at shifter boot or coin tray (shifter boot 5.50″ high)
Camaro Saddle Console
Part Number: GMCAMS6869
Chevrolet Camaro, 1968-1969
Camaro Saddle Console
Very simple installation and removal, no permanent changes to the car’s interior and no tools required. Saddle consoles fit securely over the factory-installed (OE) console, between factory bucket seats.
Place the console over top of the factory console and just slide it forward! Our Console is designed to fit snug over the factory console. The Camaro console has TALL sides to slide down snuggly between the factory console and bucket seats. This console will not interfere with the factory gear selector.
Note: If you do NOT have a factory (OE) console then this Saddle console will NOT work. You will need to purchase our HumpHugger console which is designed to fit over the transmission tunnel. Click Here to see the HumpHugger version.
Vinyl Color Options
With our large selection of in-stock automotive grade vinyl, you are sure to find the right color and grain to match your vehicle. We can even use your own material to cover any console design, no extra cost to you. In most cases, we’ll only need one yard of material to fully cover most console designs. Optional two-tone colors are available for most console designs whether you are choosing from our vinyl selection or providing your own material.
In addition to the standard color options, we offer a host of premium vinyl colors which are available for an additional cost of $16.00 per console. These colors are limited and unique to certain vehicle models and years. The additional cost is due to their random availability and the premium cost to obtain from suppliers. If these vinyl options are listed on the product page colors then they are currently available for your console.
Vinyl Samples are available to make it easier to pick the right color or grain. We’ll ship the sample at no cost, directly to you.
Email us at [email protected] to request sample vinyl swatches, ordering two-tone color options or using your own upholstery material.
Dual Drink Holder Options
The drink holders in our consoles are made from durable, long-lasting polymers that will provide many, many years of functionality while retaining the striking appearance you expect from Classic Consoles. All drink holders come standard with a black finish around the top rim. The top rim is the area of the drink holder predominately seen when the console is installed in your vehicle so we offer you the option of four additional distinct colors & finishes to customize your console or match the existing trim package of your vehicle’s interior.
HumpHugger and Saddle Consoles have two different drink holder sizes, one medium and one large. The large drink holder is upgradable to our new Mega size drink holder (you can read the difference between the Large and Mega). The medium is not upgradeable to a larger drink holder due to the size limitation of the console.
Medium Drink Holder – Our medium-sized drink holder that is included with this console will accommodate 12 oz. soda cans and most smaller plastic water bottles. The interior diameter is just over 2 3/4 inches with a depth of just over 3 inches.
Large Drink Holder – Our Large-sized drink holder included with this console accommodates virtually all types of soda & energy drink cans, most plastic water bottles, and larger coffee cups. The bottom half of our large drink holder has a unique step down shape to allow smaller drink containers a secure hold while the upper half is large enough to hold bigger beverages with larger diameters.
Mega Drink Holder – You also have an option to upgrade the Large Drink Holder in this console to our brand new Mega Drink Holder. The Mega Drink holder is specifically designed to hold large, insulated beverage containers by maintaining a wide internal diameter from top to bottom and does not “step down” like the Large Drink Holder. We built the Mega Drink Holder as a special request from many of our great customers who wanted a better fitting drink holder for their large insulated mugs, like many of the Yeti styles.
Medium Drink Holder Dimensions:
2 3/4 inch interior diameter, from top to bottom (2.720″ to be exact)
3 inch interior depth
Large Drink Holder Dimensions
3 5/8 inch upper interior diameter (3.691″ to be exact)
2 13/16 inch lower interior diameter
3 1/4″ inch interior depth
Mega Drink Holder Dimensions
3 5/8 inch interior diameter, from top to bottom (3.667″ to be exact)