Do you own a former Chevrolet Impala police interceptor? Law enforcement remove all of their equipment and most interior items from vehicles prior to allowing the general public to own these cars. If you own one of these cruisers then chances are you need some storage, an armrest and drink holders. This console solves that problem!
The HumpHugger console fills the void between the bucket seats where police gear once lived. And provides civilian friendly conveniences that you come to expect in your daily driver. For example, our standard features a deep cavity, fully enclosed storage compartment topped with a comfortably padded armrest. Additionally, the console is ergonomically positioned at the right height to give maximum support to the driver’s arm. Finally, it comes with two medium sized drink holders that sit side-by-side with a capacity to hold most soda cans and 16oz. bottles of water.
Mounting plates and a contoured bottom secure the console to the transmission tunnel. The mounting plates come from the factory pre-installed on the bottom of the console. The plates mount to the floorboard with the included screws. Installation will require basic hand tools. Detailed instructions included.
Hand Built in the United States
Chevrolet Impala Police Interceptor HumpHugger Console 2006-2016
Specs
Impala Police Intercepter HumpHugger Console
Part Numbers:
GMPOLICEIMPHH
What’s Included
Two Medium Drink Holder
Padded Armrest – Also a Hinged Lid for Storage Compartment
Storage Compartment, Under Armrest
Map/Document Sleeve, Underside of Lid
Dimensions:
8 1/4” Wide at the drink holders
8” Wide at storage area
20 1/2” Length overall
9 3/4” Height at drink holders
6 1/2” x 10 3/4″ x 5 1/4″ Internal storage area dimensions (W x L x D)
Vehicle Guide
Impala Police Intercepter HumpHugger Console
Part Number: GMPOLICEIMPAHH
Chevrolet Impala Police Interceptor, 2006-2016
Installation
Impala Police Interceptor HumpHugger Console
Very simple installation and removal, no permanent changes to the car’s interior and no tools required. HumpHugger consoles fit securely over the carpeted transmission tunnel (the Hump) between factory bucket seats, using its velcro bottom to attach and hold itself in place.
Vinyl Color Options
Color Options from Classic Consoles
With our large selection of in-stock automotive grade vinyl, you are sure to find the right color and grain to match your vehicle. We can even use your own material to cover any console design, no extra cost to you. In most cases, we’ll only need one yard of material to fully cover most console designs. Optional two-tone colors are available for most console designs whether you are choosing from our vinyl selection or providing your own material.
In addition to the standard color options, we offer a host of premium vinyl colors which are available for an additional cost of $16.00 per console. These colors are limited and unique to certain vehicle models and years. The additional cost is due to their random availability and the premium cost to obtain from suppliers. If these vinyl options are listed on the product page colors then they are currently available for your console.
Vinyl Samples are available to make it easier to pick the right color or grain. We’ll ship the sample at no cost, directly to you.
Email us at [email protected] to request sample vinyl swatches, ordering two-tone color options or using your own upholstery material.
201 Fiesta Red
202 Red
203 Dark Red
204 Maroon
205 Bright Red
208 MAD 4470 Blue
209 Corinthian Blue
210 Sierra Lt. Blue
211 Madrid Lt. Blue
212 Bright Blue
213 Metallic Dk. Blue
214 Dark Madrid Blue
215 66M Turquoise
216 Aqua
217 HDI 6858 Teal
218 HDI 6857 Peacock
220 Dark Brown
221 Coconut Brown
222 Parchment
224 Joe Camel
225 Claret
227 Buckskin
228 Saddle
230 Lone Star Silver
231 Light Graphite
232 Titanium
233 Graphite
234 SVO Gray
235 Wallaby White
236 White
237 57T White
238 Ivory
239 Jamaican Sun
240 Orange
241 Ivy Gold
243 69 Madrid Green
244 Sierra Black
245 Madrid Black
246 Midnight Black
247 Carbon Fiber Black
248 Carbon Fiber Silver
256 Nugget Gold
301 Palomino
302 Emberglow
303 Ginger
304 Light Parchment
Drink Holder Color Options
The drink holders in our consoles are made from durable, long-lasting polymers that will provide many, many years of functionality while retaining the striking appearance you expect from Classic Consoles. All drink holders come standard with a black finish around the top rim. The top rim is the area of the drink holder predominately seen when the console is installed in your vehicle so we offer you the option of four additional distinct colors & finishes to customize your console or to match the existing trim package of your vehicle’s interior.
Our medium-sized drink holders that are included with this console will accommodate 12 oz. soda cans and most smaller plastic water bottles. The interior diameter is just over 2 3/4 inches with a depth of just over 3 inches.
Medium Drink Holder Dimensions:
2 7/8 inch interior diameter, from top to bottom (2.720″ to be exact)
3 inch interior depth
Rim Color Options:
Black
Chrome
Pewter
Matte Silver
Camouflage
Rim Color Options, Right to Left, Top Row – Chrome, Matte Silver. Bottom Row: Pewter, Camo & Black
Manage Cookie Consent
To provide the best experiences, we use technologies like cookies to store and/or access device information. Consenting to these technologies will allow us to process data such as browsing behavior or unique IDs on this site. Not consenting or withdrawing consent, may adversely affect certain features and functions.
Functional
Always active
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
Preferences
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
Statistics
The technical storage or access that is used exclusively for statistical purposes.The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
Marketing
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.
The drink holders in our consoles are made from durable, long-lasting polymers that will provide many, many years of functionality while retaining the striking appearance you expect from Classic Consoles. All drink holders come standard with a black finish around the top rim. The top rim is the area of the drink holder predominately seen when the console is installed in your vehicle so we offer you the option of four additional distinct colors & finishes to customize your console or to match the existing trim package of your vehicle’s interior.