The Ford Bronco HumpHugger fits between the front bucket seats. And, as the name states, it securely rests on the transmission tunnel (the “Hump”). The Bronco HumpHugger Console is one of only a few consoles where we provide a mounting bracket for added stability. This bracket is pre-installed on the consoles and is optional to use. It secures by using the lower seat belt bracket bolts.
If you own one these amazing classic Broncos then you already know how awesome it would be to have the finished look of a handcrafted custom console. Not to mention modern, convenient features. This HumpHugger console has all the quality features that will bring a whole new dimension to your Bronco life style. For example, features include a padded armrest ergonomically positioned to support the driver’s arm for maximum comfort. Under the hinged armrest is a vast storage compartment that provides enough space for those smaller essentials. Last but not least are two large drink holders which are upgradable to our new Mega size.
If you’re concerned about the original look while at a car show it will only take a few minutes to remove. The bracket has slots where it connects to the seat belt bolts. Simply loosen the bolts and slide and detached the console. It only takes a few moments to remove and it will give your Bronco that original look. Just don’t forget to put it back in before leaving the show!
Entirely hand built by skilled craftsmen at our U.S. factory in Cairo, GA
On certain years of the Ford Bronco the seat lever located on the side of the seat, toward the center of the vehicle may be difficult to reach once the console is installed.
On certain years the included aluminum bracket used for mounting to the seat belt floor brackets may not fit and therefore should not be used.
Ford Bronco HumpHugger Console 1966-1977
Specs
Bronco HumpHugger Console
Part Numbers:
FMBHH6677
What’s Included
One Large Drink Holder (upgradable to Mega size)
One Medium Drin Holder
Padded Armrest – Also a Hinged Lid for Storage Compartment
Storage Compartment, Under Armrest
Map/Document Sleeve, Underside of Lid
Built-In Aluminum Mounting Bracket (seatbelt bolts not included)
Dimensions:
10-3/4” Wide at the drink holders
8-7/8” Wide at storage box & shifter boot or coin tray
7-1/4″ Wide in the storage area
20-5/8” Length overall
5-1/4″ Length at the drink holders
8-7/8″ Length of the armrest
7-1/4″ Length of the storage area
5-3/4” Height at drink holders (w/ adjustable plates flat)
12-3/4” Height at shifter boot or coin tray (shifter boot 5.50″ high)
8-1/8″ Height in the storage area
Vehicle Guide
Bronco HumpHugger Console
Part Number: FMBHH6677
Ford Bronco, 1966-1977
Installation
Bronco HumpHugger Console
HumpHugger consoles fit securely over the carpeted transmission tunnel (the Hump) between factory bucket seats, using its velcro bottom to attach and hold itself in place. The Bronco HumpHugger comes with a built-in mounting bracket located on the bottom rear of the console, which bolts to the seatbelt mounts on the floor. Using the bracket is optional and does not need to be connected but is recommended for a more secure fit, especially when driving off-road.
On certain years of the Ford Bronco the seat lever located on the side of the seat, toward the center of the vehicle may be difficult to reach once the console is installed.
On certain years the included aluminum bracket used for mounting to the seat belt floor brackets may not fit and therefore should not be used.
Vinyl Color Options
With our large selection of in-stock automotive grade vinyl, you are sure to find the right color and grain to match your vehicle. We can even use your own material to cover any console design, no extra cost to you. In most cases, we’ll only need one yard of material to fully cover most console designs. Optional two-tone colors are available for most console designs whether you are choosing from our vinyl selection or providing your own material.
In addition to the standard color options, we offer a host of premium vinyl colors which are available for an additional cost of $16.00 per console. These colors are limited and unique to certain vehicle models and years. The additional cost is due to their random availability and the premium cost to obtain from suppliers. If these vinyl options are listed on the product page colors then they are currently available for your console.
Vinyl Samples are available to make it easier to pick the right color or grain. We’ll ship the sample at no cost, directly to you.
Email us at [email protected] to request sample vinyl swatches, ordering two-tone color options or using your own upholstery material.
Dual Drink Holder Options
The drink holders in our consoles are made from durable, long-lasting polymers that will provide many, many years of functionality while retaining the striking appearance you expect from Classic Consoles. All drink holders come standard with a black finish around the top rim. The top rim is the area of the drink holder predominately seen when the console is installed in your vehicle so we offer you the option of four additional distinct colors & finishes to customize your console or match the existing trim package of your vehicle’s interior.
HumpHugger and Saddle Consoles have two different drink holder sizes, one medium and one large. The large drink holder is upgradable to our new Mega size drink holder (you can read the difference between the Large and Mega). The medium is not upgradeable to a larger drink holder due to the size limitation of the console.
Medium Drink Holder – Our medium-sized drink holder that is included with this console will accommodate 12 oz. soda cans and most smaller plastic water bottles. The interior diameter is just over 2 3/4 inches with a depth of just over 3 inches.
Large Drink Holder – Our Large-sized drink holder included with this console accommodates virtually all types of soda & energy drink cans, most plastic water bottles, and larger coffee cups. The bottom half of our large drink holder has a unique step down shape to allow smaller drink containers a secure hold while the upper half is large enough to hold bigger beverages with larger diameters.
Mega Drink Holder – You also have an option to upgrade the Large Drink Holder in this console to our brand new Mega Drink Holder. The Mega Drink holder is specifically designed to hold large, insulated beverage containers by maintaining a wide internal diameter from top to bottom and does not “step down” like the Large Drink Holder. We built the Mega Drink Holder as a special request from many of our great customers who wanted a better fitting drink holder for their large insulated mugs, like many of the Yeti styles.
Medium Drink Holder Dimensions:
2 3/4 inch interior diameter, from top to bottom (2.720″ to be exact)
3 inch interior depth
Large Drink Holder Dimensions
3 5/8 inch upper interior diameter (3.691″ to be exact)
2 13/16 inch lower interior diameter
3 1/4″ inch interior depth
Mega Drink Holder Dimensions
3 5/8 inch interior diameter, from top to bottom (3.667″ to be exact)
3 3/8 inch interior depth
Rim Color Options:
Black
Chrome
Pewter
Matte Silver
Camouflage
Manage Cookie Consent
To provide the best experiences, we use technologies like cookies to store and/or access device information. Consenting to these technologies will allow us to process data such as browsing behavior or unique IDs on this site. Not consenting or withdrawing consent, may adversely affect certain features and functions.
Functional
Always active
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
Preferences
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
Statistics
The technical storage or access that is used exclusively for statistical purposes.The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
Marketing
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.