The Firebird Saddle console fits over a factory-installed console, between the bucket seats and just behind the gear selector.
This console comes standard with quality features that will bring a whole new enjoyment to your cruising life. For example a padded armrest ergonomically positioned to support the driver’s arm for maximum comfort, an under-lid storage compartment, two large drink holders. You can also upgrade the large drink holder to our new Mega drink holder which accommodates the largest variety of beverage container sizes.
Best of all, no tools are necessary for installation. Which also means no modifications or permanent changes to your interior. Your car remains in its original condition. In no time, you’ll be ready to cruise and enjoy a favorite beverage without the worry of spilling all over your interior.
Going to a car show? In a matter of seconds, you can remove the console for that original factory look. Just don’t forget to put the drink holder back in before leaving the show!
One important note, this console will NOT fit in your car unless you have a factory (OE) console installed. In this case you will want to use our HumpHugger console which has all the same features but uses the transmission tunnel to sit on. Click Here to see the HumpHugger version.
Hand Built in the United States
Pontiac Firebird Console, 1967-1969
Pontiac Firebird Saddle Console
Two Large Drink Holders (upgradable to Mega size)
Padded Armrest – Also a Hinged Lid for Storage Compartment
Storage Compartment, Under Armrest
Map/Document Sleeve, Underside of Lid
11” Width overall
20-1/2″” Length overall
5” Height installed
__” Height overall
7-1/4″ Front width of storage area
6-1/4″Rear width of storage area
10-1/8″ Length of storage area
3-3/4″ Depth of storage area
Firebird Saddle Console
Part Number: GMFIRES6769
Pontiac Firebird, 1967-1969
Pontiac Firebird Saddle Console
Very simple installation and removal, no permanent changes to the car’s interior and no tools required. Saddle consoles fit securely over the factory-installed (OE) console, between factory bucket seats.
Place the console over top of the factory console and just slide it forward! Our Console is designed to fit snug over the factory console. The Firebird console has TALL sides to slide down snuggly between the factory console and bucket seats. This console will not interfere with the factory gear selector.
Note: If you do not have a factory (OE) console then this Saddle console will NOT work. You will need to purchase our HumpHugger console which is designed to fit over the transmission tunnel. Click Here to see the HumpHugger version.
Vinyl Color Options
With our large selection of in-stock automotive grade vinyl, you are sure to find the right color and grain to match your vehicle. We can even use your own material to cover any console design, no extra cost to you. In most cases, we’ll only need one yard of material to fully cover most console designs. Optional two-tone colors are available for most console designs whether you are choosing from our vinyl selection or providing your own material.
In addition to the standard color options, we offer a host of premium vinyl colors which are available for an additional cost of $16.00 per console. These colors are limited and unique to certain vehicle models and years. The additional cost is due to their random availability and the premium cost to obtain from suppliers. If these vinyl options are listed on the product page colors then they are currently available for your console.
Vinyl Samples are available to make it easier to pick the right color or grain. We’ll ship the sample at no cost, directly to you.
Email us at [email protected] to request sample vinyl swatches, ordering two-tone color options or using your own upholstery material.
Drink Holder Options
The drink holders in our consoles are made from durable, long-lasting polymers that will provide many, many years of functionality while retaining the striking appearance you expect from Classic Consoles. All drink holders come standard with a black finish around the top rim. The top rim is the area of the drink holder predominately seen when the console is installed in your vehicle so we offer you the option of four additional distinct colors & finishes to customize your console or match the existing trim package of your vehicle’s interior.
Our large-sized drink holders are included with this console, they accommodate virtually all types of soda & energy drink cans, most plastic water bottles and larger coffee cups. The bottom half of our large drink holders have a unique step down shape to allow smaller drink containers a secure hold while the upper half is large enough to hold bigger beverages with larger diameters.
You also have an option to upgrade the Large Drink Holders in this console to our brand new Mega Drink Holder. The Mega Drink holder is specifically designed to hold large, insulated beverage containers by maintaining a wide diameter from top to bottom and does not “step down” like the Large Drink Holder. We built the Mega Drink Holder as a special request from many of our great customers who wanted a better fitting drink holder for their large insulated mugs, like many of the Yeti styles.
Large Drink Holder Dimensions
3 5/8 inch upper interior diameter (3.691″ to be exact)
2 13/16 inch lower interior diameter
3 1/4″ inch interior depth
Mega Drink Holder Dimensions
3 5/8 inch interior diameter, from top to bottom (3.667″ to be exact)
3 3/8 inch interior depth
Rim Color Options:
Manage Cookie Consent
To provide the best experiences, we use technologies like cookies to store and/or access device information. Consenting to these technologies will allow us to process data such as browsing behavior or unique IDs on this site. Not consenting or withdrawing consent, may adversely affect certain features and functions.
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
The technical storage or access that is used exclusively for statistical purposes.The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.