This hand built Ford Cobra Drinkster console slides in between the factory bucket seats, just behind the gear selector and rests on the trans tunnel. Additionally, you will appreciate the professionally upholstered craftsmanship, coupled with high-quality automotive-grade vinyl. Equally important is our extensive selection of standard color options that complement original and aftermarket interiors.
The cobra is a unique and fun car to drive. But it also lacks some of the modern day conveniences that bring ultimate satisfaction to your driving experience. The superior craftsmanship of this classic console and its convenient features will add a whole new dimension to your cruising life style. For example, standard features include a padded armrest ergonomically designed with premium comfort in mind and provides maximum support for those longer drives. Under the hinged armrest is a much needed storage compartment that provides enough space for those smaller essentials. And finally, the front of the console has two built-in medium sized drink holders.
No need to be concerned about that original look while at a car show. Because it only takes a few seconds to remove the console. This is certainly one of the best features. Just don’t forget to put it back in the car before leaving the show!
The Specification and Installation tabs provide further detail on product dimensions and installation instructions. Likewise, the Color Options tab and Drink Holder Options tab will both provide large color swatches to view.
As with all our products, this console is entirely hand crafted in the U.S.
Ford Cobra Drinkster Console
Hand Built in the USA.
Specs
Ford Cobra Drinkster Console
Part Number:
FCOBRABD-DRINKSTER
What’s Included:
Two Medium Drink Holders
Padded Armrest – Also a Hinged Lid for Storage Compartment
Storage Compartment, Under Armrest
Map/Document Sleeve, Underside of Lid
Pre-Installed Strap Kit for Securing Console
Dimensions
8 1/4″ Wide at the drink holders
8″ Wide at the main body
17 1/4″ Length overall
4″ Height at drink holders
7″ Height at the main body
5″ x 10 1/2″ x 3″ – 4″ (bottom slopes front to back) Internal storage (W x L x D)
Vehicle Guide
Ford Cobra Drinkster Console
Part Number: FCOBRABD-DRINKSTER
Ford Cobra, all years
Installation
Ford Cobra Drinkster Consoles
It simply could not get any easier to install or remove than this console. Installation is so fast and simple, instructions may not be needed, but here they are. Place the console on top of the raised transmission tunnel between the bucket seats. There is velcro sewn into the bottom of the console to hold it secure, provided you have a carpeted tunnel. If you have a non-carpeted, slippery surface then you may want to purchase and adhere self-adhesive velcro to the tunnel, allowing it to grab and attach to the velcro on the bottom of the console.
Vinyl Color Options
Color Options from Classic Consoles
With our large selection of in-stock automotive grade vinyl, you are sure to find the right color and grain to match your vehicle. We can even use your own material to cover any console design, no extra cost to you. In most cases, we’ll only need one yard of material to fully cover most console designs. Optional two-tone colors are available for most console designs whether you are choosing from our vinyl selection or providing your own material.
In addition to the standard color options, we offer a host of premium vinyl colors which are available for an additional cost of $16.00 per console. These colors are limited and unique to certain vehicle models and years. The additional cost is due to their random availability and the premium cost to obtain from suppliers. If these vinyl options are listed on the product page colors then they are currently available for your console.
Vinyl Samples are available to make it easier to pick the right color or grain. We’ll ship the sample at no cost, directly to you.
Email us at [email protected] to request sample vinyl swatches, ordering two-tone color options or using your own upholstery material.
201 Fiesta Red
202 Red
203 Dark Red
204 Maroon
205 Bright Red
208 MAD 4470 Blue
209 Corinthian Blue
210 Sierra Lt. Blue
211 Madrid Lt. Blue
212 Bright Blue
213 Metallic Dk. Blue
214 Dark Madrid Blue
215 66M Turquoise
216 Aqua
217 HDI 6858 Teal
218 HDI 6857 Peacock
220 Dark Brown
221 Coconut Brown
222 Parchment
224 Joe Camel
225 Claret
227 Buckskin
228 Saddle
230 Lone Star Silver
231 Light Graphite
232 Titanium
233 Graphite
234 SVO Gray
235 Wallaby White
236 White
237 57T White
238 Ivory
239 Jamaican Sun
240 Orange
241 Ivy Gold
243 69 Madrid Green
244 Sierra Black
245 Madrid Black
246 Midnight Black
247 Carbon Fiber Black
248 Carbon Fiber Silver
256 Nugget Gold
301 Palomino
302 Emberglow
303 Ginger
304 Light Parchment
Drink Holder Color Options
The drink holders in our consoles are made from durable, long-lasting polymers that will provide many, many years of functionality while retaining the striking appearance you expect from Classic Consoles. All drink holders come standard with a black finish around the top rim. The top rim is the area of the drink holder predominately seen when the console is installed in your vehicle so we offer you the option of four additional distinct colors & finishes to customize your console or to match the existing trim package of your vehicle’s interior.
Our medium-sized drink holders that are included with this console will accommodate 12 oz. soda cans and most smaller plastic water bottles. The interior diameter is just over 2 3/4 inches with a depth of just over 3 inches.
Medium Drink Holder Dimensions:
2 7/8 inch interior diameter, from top to bottom (2.720″ to be exact)
3 inch interior depth
Rim Color Options:
Black
Chrome
Pewter
Matte Silver
Camouflage
Rim Color Options, Right to Left, Top Row – Chrome, Matte Silver. Bottom Row: Pewter, Camo & Black
Manage Cookie Consent
To provide the best experiences, we use technologies like cookies to store and/or access device information. Consenting to these technologies will allow us to process data such as browsing behavior or unique IDs on this site. Not consenting or withdrawing consent, may adversely affect certain features and functions.
Functional
Always active
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
Preferences
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
Statistics
The technical storage or access that is used exclusively for statistical purposes.The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
Marketing
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.
The drink holders in our consoles are made from durable, long-lasting polymers that will provide many, many years of functionality while retaining the striking appearance you expect from Classic Consoles. All drink holders come standard with a black finish around the top rim. The top rim is the area of the drink holder predominately seen when the console is installed in your vehicle so we offer you the option of four additional distinct colors & finishes to customize your console or to match the existing trim package of your vehicle’s interior.